Pinless Bridge Drilling Jig



Drill pinless style bridges with ease and accuracy with the ELEVATE Pinless Bridge Drilling Jig.  The jig’s tilting table allows you to set the angle of the string holes with the turn of a knob.  The steel drill plates give you multiple options for string spacings and ensures you’re drilling string holes in a straight line.  *Fits most bridges/blanks up to 1.5″ wide.

Jig body and drill plates sold individually.

Don’t forget to use high quality drill bits. (sold separately)

See more information below under the “product information” tab.

SKU: PBD-1 Category:

Available Options

Pinless Bridge Drilling Jig (body only)


Steel String Drill Plate


Classical Drill Plate


Ukulele Drill Plate


7/64″ Drill Bit


1/16″ Drill Bit



I purchased the Pinless Bridge Drilling Jig to replace my own shop-built, non-adjustable, used and worn and needing to be recreated drilling jig. I even had a specific custom requirement that ELEVATE was willing to accommodate for a very reasonable fee. The tool is well thought out and works exactly as described, ensuring the accurate placement and drilling of the string holes.
~Christopher Cozad, Cozad Guitars

I’m a big fan of pinless bridges for acoustic guitars and my first few attempts were less successful than I was aiming for because of tool limitations… not to mention wasting good material. No matter how careful I was, how well I thought I had set up my bridge blank in the vise, adjust for cutting angle, the results were not satisfactory. Then I got the ELEVATE Pinless Bridge Drilling Jig. It was a dramatic improvement in process – after a few practice runs, I was able to dial in exactly the angle,  entry and  exit location of the string path for my desired break angle and my pinless bridges turn out as I design them to. The ELEVATE jig is a wonderful tool and one of my favorites!
~ Peter Streit, Peter Streit Guitars

Additional information


-Solid aluminum body gives a stable base for drilling
-Tilting table allows for accurately angled holes
-Moveable drill plates feature multiple holes spacing

What’s Included

-Solid aluminum jig body
-Adjustment knobs
(drill plates sold separately)

Drill Plate Specs

-Made of solid steel
-All spacings are equidistant
-Spacings are measured on center
-Classical spacings: 56mm, 57mm, 57.5mm, 58mm, 59mm, 60mm
-Classical holes size: 1/16"
-Steel string spacings: 2 1/8", 2 5/32", 2 3/16", 2 1/4" 2 5/16", 2 3/8"
-Steel sting hole size: 7/64"
-Ukulele string spacings: 40mm, 41mm, 42mm, 43mm, 44mm, 45mm
-Ukulele hole size: 1/16"