$62.63
The ELEVATE Dot Driller makes it quick and easy to create your own dots for inlay from a variety of materials. The tool is designed to be used in a drill press. Simply plunge the tool into the material like a drill bit. Retract the tool when it breaks thru the material or when the plug breaks free. Turn off the machine and use the spring-loaded ejector pin to remove the plug- then repeat.
*Hard materials like pearl are hard on cutters. Firm work holding such as clamping down the material is recommended to reduce the chance of wear and/or tool breakage. Not intended for use in metal.
Pairs well with the ELEVATE Dot Doctor.
 | 2mm Dot Driller | $62.63 | $ | ||
| 3/32″ Dot Driller | $62.63 | $ | ||
| 1/4″ Dot Driller | $62.63 | $ |
The Dot Driller has expanded my design options for fretboard and bridge pin inlays. Where I was previously limited to metal rods and tubes, and mass-produced, generic dots, the Dot Driller allows me to create unique inlays to achieve personalized and cohesive aesthetics on my instruments.
~Theunis Fick, Theunis Fick Guitars
| Features | -Tool steel body |
|---|
